gabmuks

Forum Replies Created

Viewing 6 posts - 21 through 26 (of 26 total)
1 2 3
  • Author
    Posts
  • June 12, 2011 at 9:18 am in reply to: Re: Ist Time Valve Lap #32563
    gabmuks
    Participant
      • Offline

      Tinbender wrote; “Yep, the wife picked it up at a garage sale for $35.00. The old Briggs
      4hp needed more than lapping on the intake valve so I threw on a Harbor
      Freight 6hp. Set your logs against the screw sideways and she splits
      real good” cool

      CooI!!!  I've never seen anything like that. I am getting a bit tired of splitting by hand.

      June 11, 2011 at 9:10 pm in reply to: Re: Ist Time Valve Lap #32558
      gabmuks
      Participant
        • Offline

        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Valveseat.jpgCan anyone give comment on condition/status/possible problems

        of this enginehttp://i1229.photobucket.com/albums/ee470/gabmuks/th_Valves1.jpgSeems to be all carboned up inside. Is that caused by late valve lapping/leaky valves?
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Valves.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Valveguide.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Injectors.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Injector1.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Head2.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Head1.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Head.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Cylinders.jpg
        http://i1229.photobucket.com/albums/ee470/gabmuks/th_Cylinder2.jpg

        June 11, 2011 at 5:56 pm in reply to: Re: Ist Time Valve Lap #32557
        gabmuks
        Participant
          • Offline

          Sorry, but I've reduced the file size of all my pictures to 300kb or less for each one.

          But none of them will post here. This is the error message that I get from your site.

          Fatal error: Allowed memory size of 67108864 bytes exhausted (tried to allocate 2592 bytes) in /home1/ctoanet/public_html/ctoa/wp-content/plugins/simple-forum/editors/tinymce/plugins/filemanager/fm-support.php on line 153

          Does anyone have any ideas?

          June 11, 2011 at 12:57 pm in reply to: Re: Ist Time Valve Lap #32553
          gabmuks
          Participant
            • Offline

            Hi Tinbender

            What is that contraption? Log splitter maybe?

            March 17, 2011 at 6:52 am in reply to: Valve adjust proceedure KM385BT #31686
            gabmuks
            Participant
              • Offline

              Thanks SpringValley.

              I did adjust valves as best I could. Engine runs much smoother.

              But I had a really hard time finding TDC for each cylinder.

              There are two marks on the flywheel, maybe 5/8 inch apart.

              Looks like this…….             l           ll  

              I figured these were for No 1 cylinder.

              Does anyone have a better way to find to find TDC for each? readin

              March 16, 2011 at 3:03 pm in reply to: Valve adjust proceedure KM385BT #31680
              gabmuks
              Participant
                • Offline

                Thanks tinbender.

                I also checked head torque @ 140

                found most needed tightening

              • Author
                Posts
              Viewing 6 posts - 21 through 26 (of 26 total)
              1 2 3