Erik

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Jinma 284 wiring problem #45961
    Erik
    Participant
      • Offline

      Thanks for the info; when the rain lets up a bit I will get back under the dash and try to trace the remaining mystery wires down.

      So far, the remaining unidentified circuit numbers are:

      #72 (white) from glow plug relay power out to harness under dash.

      #74 (green) from ignition switch terminal #2

      #77 (yellow) from ignition switch terminal #4

      Once the wires are traced I will post a list of where they terminate.

      in reply to: Jinma 284 wiring problem #45947
      Erik
      Participant
        • Offline

        Thanks for the information. Did your 284 have a large mechanical relay under the right side of the dash? Keno Tractors ID’d it as a glow plug relay; it is a Chinese “ALAE” brand 12v volt 90 amp relay. The wires  associated with the relay appear factory installed into the wiring harness wrap. I removed and tested it and the relay works fine, so I don’t know why it was disconnected and the wiring modified.

        Erik

        Attachments:
        You must be logged in to view attached files.
      Viewing 2 posts - 1 through 2 (of 2 total)