Kevin Waller

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: 2004 jm204 will not start after fuel filter replacement #37243
    Kevin Waller
    Participant
      • Offline

      Thanks David, took it apart this weekend and the tank filter along with the filter in the petcock were clogged to the point of disintegration. Both filters were completely destroyed and clogged. Took the remaining filter material and clogging gunk out of the petcock and flushed tank. also cleaned the inline filter in the delivery hose. Tractors runs great now. I think I need to purchase replacements for the two filters at the petcock one looks like a finger and goes up into the tank attaches to the top of the petcock and the other is just above the sediment bowl. My manual doesn't show these so I will have to find a parts dealer and get a description of these. 

      in reply to: 2004 jm204 will not start after fuel filter replacement #37206
      Kevin Waller
      Participant
        • Offline

        I am having a similar problem as tbj8257. I have a 2005 jm204. The tractor was running fine and then would not start. So I cracked a line at the engine and used the primer punp to check for fuel and I had to pump 150 times to get any fuel out the injector. It ran fine again for 5 hours of operation and then did the same thing. 

         

        I changed the fuel filter and then cracked a line and use the primer pump to get it running but it sputters and dies with in a few minutes.

         

        I also don' know f the parts names so please dumb down the suggestions for me. pics would help as well.

        thank you in advance for helping. readin

      Viewing 2 posts - 1 through 2 (of 2 total)