msshearin

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 36 total)
1 2 3 4
  • Author
    Posts
  • June 28, 2011 at 12:17 pm in reply to: bolt holes in replacement water pump for fan screws. #32656
    msshearin
    Participant
      • Offline

      oops left it on the old one, sorry for the bother…..thanks for the infoembarassed

      June 28, 2011 at 7:05 am in reply to: bolt holes in replacement water pump for fan screws. #32652
      msshearin
      Participant
        • Offline

        Spacer? I saw no spacer Tommy. Did I miss something?

        April 6, 2011 at 9:43 pm in reply to: Cylinder Head Gasket #31961
        msshearin
        Participant
          • Offline

          Homer I had the same problem. Bert told me about his problem with this plate. I checked it and found out I had left a bolt out on the top right. Replaced the bolt and problem solved.laugh. Thanks again Berthailking

          March 13, 2011 at 9:54 pm in reply to: fuse #31649
          msshearin
          Participant
            • Offline

            Me too Bender…the whole story is not that puzzling….ordered an ampmeter from ebay, came in,opened the box put on tractor without really looking at box. Sparks flew when wrench hit something,blew fuse.fuse replaced. No electrics,assumed really f'ed up something when grounded wrench. Wasted several days troubleshooting. Checking wires etc,etc. Read Larrys last post about fire in and out of ampmeter hmmm. Go check it fire in. none out.Look closely.Dam its a voltmeter not an ampmeter.Look at box says ampmeter(thanks ebay)frown.Put old nonworking ampmeter on andlaugh problem solved.Just ordered a jinma AMPMETER from circle G.Guess several lessons learned #1 GO OEM…not ebay…..thanks for all the support. #2 remove negetive battery cable….!hailkinghailkinglaugh

            March 13, 2011 at 8:09 pm in reply to: fuse #31637
            msshearin
            Participant
              • Offline

              yes sirembarassed

              March 13, 2011 at 5:21 pm in reply to: fuse #31621
              msshearin
              Participant
                • Offline

                Ok Larry you ain't gonna believe this!!!!!It was the voltmeter…in side hot out side not…put old one back on….problem solved…whoed of thought it….thanks for the help dude!!!!hailkinghailkinghailkinghailking

                March 13, 2011 at 4:27 pm in reply to: fuse #31616
                msshearin
                Participant
                  • Offline

                  no power to key switch Larry but going to trace the yellow wire now thanks I'll let u knowhailking

                  March 12, 2011 at 9:22 pm in reply to: fuse #31609
                  msshearin
                  Participant
                    • Offline

                    square old stile fuse box sir…+ on one side of voltmeter – on other

                    March 12, 2011 at 6:48 pm in reply to: fuse #31605
                    msshearin
                    Participant
                      • Offline

                      ok Larry I have power to the main fuse…bottom right 30 amp fuse, (which is also the one the blew)

                       and fires the voltmeter which is the only thing that is working right now!

                      ?hailking so far so good….next?

                      March 12, 2011 at 8:40 am in reply to: fuse #31599
                      msshearin
                      Participant
                        • Offline

                        it is a 2002 farm pro 2420 20hp 290 engine sir. this model does not have a guage cluster 5 seperate round guages.

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 36 total)
                      1 2 3 4