Mark Werner

Forum Replies Created

Viewing 10 posts - 11 through 20 (of 20 total)
  • Author
    Posts
  • in reply to: Guilin 252L dozer 3 pt lift inop #37381
    Mark Werner
    Participant
      • Offline

      Here is a couple pics. This is my first attempt to upload photos so bear with me 

      in reply to: Guilin 252L dozer 3 pt lift inop #37377
      Mark Werner
      Participant
        • Offline

        And no, I don’t have any manuals.

        in reply to: Guilin 252L dozer 3 pt lift inop #37376
        Mark Werner
        Participant
          • Offline

          Thanks Bob, I will try to get the seat off today and take a pic.

          in reply to: Guilin 252 track parts #37030
          Mark Werner
          Participant
            • Offline

            Success! I was able to loosen up the adjuster after loosing the lock bolt.  Thanks for the help Rob.  While doing this job I noticed several other track segments cracked.  Is that something common on these machines?

            in reply to: Guilin 252 track parts #37023
            Mark Werner
            Participant
              • Offline

              Thanks for the info. I orderEd and recieved two track segments right away thanks to tim at Farmboys. I need about 1/2 in. More slack to intall the pin. Do i have to slack off the spring tension. May be a challenge to loosen up the adjuster spring, appears frozen.

              in reply to: Guilin 252 water pump #36425
              Mark Werner
              Participant
                • Offline

                Just wanted to close this thread and let everyone know that my little dozeR is up and running and pushing dirt again. All thanks to Tim at farmboyS. He had the correct waterpump which arrived in Thorne Bay, Alaska right away. Thanks Tim! A little soldering Of damaged radiator tubEs and I was back in business. I want to thank everyone for the advise and help.

                in reply to: Guilin 252 water pump #36366
                Mark Werner
                Participant
                  • Offline

                  How much is a ty295?

                  in reply to: Guilin 252 water pump #36363
                  Mark Werner
                  Participant
                    • Offline

                    Oops, not what I was hoping to hear, but I will contact both of those dealers and see what happens. 

                     I live in the Alaskan bush so finding the bearings and seals to rebuild might be a problem.  Also I discovered a crack in the casting where the seal goes.

                     

                    Thanks for your help 

                    in reply to: Guilin 252 water pump #36361
                    Mark Werner
                    Participant
                      • Offline

                      Thanks Bob, my engine is a Fuzhou 295KY-1  17.6 HP

                      in reply to: Guilin 252 water pump #36359
                      Mark Werner
                      Participant
                        • Offline

                        Yup, two way blade, 2 cyl

                      Viewing 10 posts - 11 through 20 (of 20 total)