thunder1sr

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 7, 2018 at 5:14 pm in reply to: LW -7 back hoe seals #47936
    thunder1sr
    Participant
      • Offline

      Thanks for the info. I do have the very vague manual that came with the hoe. Unfortunatly it has a list of seals with no explanation as to where they are installed on the cylinders……

      September 13, 2011 at 1:05 pm in reply to: LW 7 dipper problem #33202
      thunder1sr
      Participant
        • Offline

        Anything on the site about rebuilding rams??

        September 13, 2011 at 8:27 am in reply to: LW 7 dipper problem #33197
        thunder1sr
        Participant
          • Offline

          talk to the mechanic at work they are called spool valves. sorry for the mistake everyone.

          September 13, 2011 at 6:05 am in reply to: LW 7 dipper problem #33196
          thunder1sr
          Participant
            • Offline

            maybe im incorrect but i thought the individual “valves” that control the rams were called spoolers. i couldve picked up someones slang word as well.I need help with this one as well LOL

            June 27, 2011 at 4:39 am in reply to: LW-7 BH curl bucket valve problem #32647
            thunder1sr
            Participant
              • Offline

              Thanks Ron that's what I needed to see. Yours is pretty much identical. There is a flat washer on the bottom of the assembly just above the top spring keeper. Then located on top of the flat washer are the o-ring and a nylon ring.  I was concerned there was a heavier rubber washer as well between the top spring keeper and the flat washer that may have dropped out when I took it apart. Mike

              June 26, 2011 at 1:51 pm in reply to: LW-7 BH curl bucket valve problem #32644
              thunder1sr
              Participant
                • Offline

                Checked it a little closer and noticed a leak coming from a small hole in the bottom of the spool valve body. There are two allens in the bottom that holds a small plate that the hole is in. Still disassembling………….. 

                June 26, 2011 at 11:24 am in reply to: LW-7 BH curl bucket valve problem #32643
                thunder1sr
                Participant
                  • Offline

                  Thanks Bob I”ll check for debris in the valve assembly. The joy sticks check out ok. Mike 

                  June 26, 2011 at 12:05 am in reply to: 12″ Bucket for LW-7 BH #32639
                  thunder1sr
                  Participant
                    • Offline

                    The name of the outfit was Betst Power Equipment.

                    June 25, 2011 at 10:30 pm in reply to: 12″ Bucket for LW-7 BH #32637
                    thunder1sr
                    Participant
                      • Offline

                      Picked one up from a company on e-bay 150 dollars that included shipping

                    • Author
                      Posts
                    Viewing 9 posts - 1 through 9 (of 9 total)