Forum Replies Created
-
Posts
-
Tommy,
Not really related to this post. Can you tell me what the correct air pressure front and rear is for a Jinma 254 ????? Have not been able to find elsewhere.
Thanks
Tone-Tone
Thanks to all who replied. This Tenderfoot Tractor Operator appreciates the knowledge and experience that comes from you guys !!!!!!!
Hi pjr, ToneTone here. Did you try calling where you and I bought our tractors and ask them ????? Please post what you find out as I may be right behind you with the same problem. Thanks !!!!!!!!
pjr
Just did my first oil change w/ filter. My Jinma 254 took just over 4.5 quarts. I measured the amount of oil that was drained to get an accurate figure. Also pre-filled the oil filter to achieve the same oil level that was in the engine at the time of draining.
Thanks pjr,
Looks like the right filter. It was a “job” trying to find a cross-over.
Now on to getting the correct oil capacities which we should be using for both of our tractors. If you find out please let me know.
Tone
pjr,
I also purchased a 254 from Keno Tractors in July. It came with the oil reading about 1/8 of an inch over the high mark on the dip-stick. I think that's the way it reads when you add the amount of oil ( with filter change ) as listed on the data sheet we received. I'm about ready to do my first oil change also. Will let you know my results.
